Home » Blog » Canon Pixma MX492 Printer Not Printing: Troubleshooting Techniques

Canon Pixma MX492 Printer Not Printing: Troubleshooting Techniques

If you are the owner of the Canon Pixma MX492 printer, you may have come across a printer not printing issue lately, given below are the measures curated to resolve such an issue to let you use your printer the way you want it to.

Possible Issues with the Canon Pixma MX492 Printer

The reason for the printer not printing issue may be either the printer’s inability to get detected or the detected printer unresponsive. To get the printer completely fixed, and know about the actual problem in your printer, you need to try out all the available fixing methods.

Fixing Techniques

Given below are the effective techniques to rule out the flickering error in your Canon Pixma MX492 Printer.

Detect your Canon Printer

The first thing for you to make your printer work back like it typically does is to make sure your device is detectible. To be detected, your need your devices to be switched on, including your Canon Pixma MX492 Printer. Ensure checking if all the wires have been plugged appropriately in, and all the connections set up suitably. After having these things arranged, you can now proceed with the detection of devices using the steps given below.

Your PC and printer need to be connected through the same wireless networks. To do this, follow the instructions given below:

  • Go to the Start menu and click to open Settings.
  • In the Settings menu, click to open Network & Internet.
  • In the Network & Internet settings, you will realize you are in the Status tab. This will reveal the progress in your network. This network status will let you know whether your devices are connected to the same network or not.

In case this option doesn’t work, you can try the printer sharing option. Using the printer sharing requires you to take the instructions given below:

  • First, come to the Change Your Network Settings and then click on Sharing Options. This will have the new screen opened up.
  • On reaching the Advanced Sharing Settings, get into the Guest or Public option and open the File and Printer Sharing option underneath.
  • Next, click on Turn On File and Printer Sharing, and click to save changes. If you still don’t see any improvement, continue with the further process.
  • Now, you need to check if the device and the router have been connected to the same network. To do this, turn off and unplug the printer and the router from the power source and turn them back on.

Assign your printer to the correct port by using the steps given below:

  • Go to the Windows Settings and click to open Devices.
  • In Devices, select Printers & Scanners in the left pane.
  • Under Printers & Scanners, find and click on your printer.
  • On Windows 10, you will be able to see options labeled as Open queue, Manage, Remove device. Click on Manage.
  • On the next screen, under Manage your device, click on Printer Properties.
  • A Printer Properties window opens up on your screen. Go to the Ports tab, and then scroll the available list of ports to find the correct port. In the case of a wireless printer, the port will likely be available with the name LAN followed by a number.
  • Check the box against your printer port and click on Apply button.

Enable Your Canon Pixma to Respond

Your printer may also be not responding not due to the connectivity fault but some other issues. To check that, you may consider taking the following measures:

Check the connectivity between your PC and router. Even if your printer is very well connected to the router and still facing a response issue, it may be possible that the PC itself may not have been connected to a network and router. Recheck the connection and reconnect to make it work.

Check for the Signal Strength

In case of the low signal strength of your printer, you will have a lack of response from your printer. It will not receive commands and therefore will not print. You can increase its signal strength by shifting the printer a bit closer to a router.

  • In order to check the signal strength, switch on your Canon Pixma printer with the paper tray having loaded with plenty of papers.
  • Next, go to the Menu and click on Setup. Click to select Device Settings and then press OK.
  • Now on LAN Settings, press OK to confirm LAN Settings and the Print LAN Details. You will then have print output with the printer’s configuration in it.
  • You will see signal strength in the list given in the percentage form. If you see the percentage low, move your printer closer to the router.

Firewall Configuration

The firewall protection of your PC may not be including the printer. Therefore, you will need to configure the Firewall settings to let in the printer’s signal in the Firewall. To do so:

  • First, go to the Windows Settings and open Update & Security.
  • Next, open Windows Security from the left side pane of the settings and select to open Windows Security from the right window pane.
  • Click the Firewall & Network Protection tab.
    • Scroll through the list and click on Allow an App Through Firewall. A new window opens up on your screen.
  • In this window, click on the Change Settings button. On finding your printer on the list, click on Allow Another App.
  • The Add an App window opens up. Browse through the list to find your printer and add it to the list.

The above methods should effectively get you through the issue of your Canon Pixma MX492 Printer Not Printing issue.

Visit for More services: www.hp.com/go/wirelessprinting